snowboard single double board which difficult
[Snowboard Knowledge Encyclopedia] How to Choose Snowboard Which Is Difficult
skis is used to improve the speed of skiing sports equipment, snowboard types are mainly divided into ski snowboard and ski double board, with the development of skiing, the emergence of the whole region snowboard, wild snowboard and other types. Snowboard size selection to consider the length, width, hardness and other aspects, according to their own height, weight, preferences to choose it. Skiing with a snowboard requires a certain amount of skiing skills, such as falling, turning, and turning around. The following MaiGoo network features an encyclopedia of snowboard knowledge for everyone. Let's learn about it.
Snowboard Introduction
skis is a kind of skiing sports equipment, invented in northern Europe at the beginning of the 20th century, used to improve the speed of skiers while skiing. The structure of the snowboard consists of the base, the arch head, the contact point, the edge, the effective edge and the bending point. Snowboard is mainly divided into two kinds of snowboard and ski double board, with the continuous progress of science and technology, snowboard has been divided into many different types.Details>>
skis?
All-region snowboarding
is a common type of snowboard, which is used by most snowboarders. This type of snowboard is aimed at sliding in any area.
Carving Snowboard
Skis used by most recreational skiers and are ideal for gliding on compacted slopes.
freestyle snowboarding
its design goal is mainly aimed at sliding outside the snow road, can float on various snow surfaces, and can easily change the sliding direction, while providing sufficient grip on the compacted snow surface.
Wild Snowboard
Compared with ordinary snowboards, the wild snowboard starts to tilt upward at the widest part of the head and tail, which can help the snowboard float better on the snow surface, thereby providing more control capabilities. The alpine wild snowboard is harder and longer than ordinary skis, which can increase stability when skiing at high speed outside the snow path, and is suitable for extreme skiers.
Slewing Skis
this kind of snowboard is generally divided into giant slalom and small slalom. The small slalom is dexterous and responsive, and can turn at an incredible speed on a solid snow surface. The giant slalom has stronger stability and grip.
cross-country skis
cross-country ski version of the holder allows the skier to lift the heel and walk like a normal stride. The bottom of the board is textured to provide better grip.
mountaineering skis
Skis used for mountain skiing activities, wider models, especially with metal blades, can travel over rough terrain or engage in ski camping activities.Details>>
Snowboard veneer size selection
Snowboard Length Selection
According to the maigoo editor, generally speaking, the longer the veneer, the more stable it is, and it is suitable for high-speed sliding. The shorter the veneer, the more mobile it is, and it is suitable for use in parks and props. Stand up the board, not tallest above your nose and not shortest below your shoulders. Generally, beginners are suitable for height minus 20cm, which can fluctuate by 3cm according to their weight and preferred playing methods.
Snowboard Width Selection
after the fixer and boots are placed according to the customary angle, are there too many parts that are wide out of the board surface? for example, if the five fingers are all outside, the board is not wide enough, and it is easy to cause accidents due to the impermanent use of the board edge when sliding. When you stand on a skateboard, your boots should be flush or slightly over the edge.
Snowboard Hardness Selection
Generally speaking, the harder the board is, the more stable it is at high speed, which is suitable for the speed of persistence. The softer the board, the easier it is to complete fancy movements when free skating. You should choose different hardness according to your favorite sliding method.Details>>
ski snowboard or double board which is difficult
the single board and the double board have a completely different feeling. After wearing the double board, standing is not a problem at all. You can slide with a little practice. The veneer is different, how to stand and slide after putting on the veneer is a big problem. Therefore, the entry of single board is slightly more difficult than double board, but the progress after entry is faster than double board, more fun and more ornamental.
for beginners, snowboarding is more difficult to get started than double-board skiing, because the sliding posture of double-board is closest to the normal walking state of people: forward, feet apart; The veneer is moving forward sideways with your feet tied. In the case of static, the balance of the veneer is not well controlled. In sliding, it relies on the center of gravity of the body to control the sliding of the plate. Even after falling down, the plate and the foot cannot be separated, which adds to its danger. For beginners, choosing a double board should be easier to use.Details>>
skis
elastic selection
skis must first consider the elasticity of the skis. The elasticity of the board is large and small. Beginners should choose skis with greater elasticity, because this kind of board is not easy to bump when encountering uneven snow, and the braking effect is also good. It is easier to manipulate.
length selection
skis is selected mainly considering height and weight factors: referring to personal height minus 12-15cm is the appropriate length of skis. Beginners can choose a shorter plate, generally between the clavicle and the chin. In terms of weight, thin people try to use a slightly shorter, flexible board, while fat people try to choose a slightly longer, harder board.
width selection
usually for female friends, as well as those with small feet of male friends, it is best to choose a narrow plate; if men have big feet (above 44) or ordinary foot size but overweight, it is best to use a widened plate.Details>>
Xiaobian recommended
skis
1. After each ski trip, be sure to take the snowboard out of the board bag, wipe off the snow water on the snowboard with soft cotton cloth or strong adsorption paper, and dry it.
2. After drying, see if there is any damage. If the board surface is damaged, the snowboard can be laid flat to remove the excess material on the board surface. Ignite the prepared rubber strip and hold it horizontally. Drop the melted rubber strip on the scar of the snowboard and cool it down.
3. After cooling, scrape off the excess rubber strip with a steel scraper. If there is a large area of damage, it should be repaired by a professional.
4. After each ski return, the steel edge of the snowboard should be repaired. First, use a rasp with gold and steel to roughly grind the damaged vertical and horizontal edges, then use a snowboard angle trimmer (adjustable angle, ideal angle is 90 degrees) to grind the steel edge along the direction of the board. Finally, use a gold and steel fine file to file off the traces left on the steel edge during the grinding process.
5. Pay attention to waxing the snowboard. At home, you can apply liquid or paste wax directly to the snowboard, or rub block wax directly on the board surface. The liquid or paste wax needs to be dried for 1-2 minutes, and then polished with the board surface, so that the wax can be better attached to the board surface. If you are afraid of damaging your skis, maigoo recommends finding a professional to wax your skis.Details>>
skiing?
Ski Suit
Ski clothing is generally divided into competitive clothing and travel clothing. Competitive wear is designed according to the characteristics of the competition, focusing on the improvement of sports performance. Travel clothing is mainly warm, beautiful, comfortable and practical.
Snowboard
There are many types of skis, ski should be based on the type of ski, ski sports and personal body and hobby to choose the right skis.
Ski Goggles
, due to the strong reflection of sunlight on the snow and the great stimulation of the eyes by the cold wind during sliding, ski goggles are needed to protect the skier's eyes.
retainer
holder, also known as the disconnector, is an important part of the connection between skis and ski boots. It plays an important role in protecting the personal safety of skiers. The holder is divided into front and rear parts, which are directly fixed on the ski with screws. The front holder cannot be moved, and the rear holder can be moved back and forth along the ski to adapt to ski boots of different sizes.
Ski Shoes
ski shoes is essential to participate in skiing activities outdoor supplies. Modern ski shoes are heavy because they have an inside and an outside. The outer layer is a hard rubber shoe that is resistant to impact and fall, while the inner layer is a warm and comfortable, foam-based soft shoe cover.
ski poles
poles are used to support forward, control balance, guide direction change, and support the body when skiing. They are an essential tool for skiers to control their center of gravity.
Other Equipment
In addition to the above-mentioned main outdoor skiing equipment, there are other auxiliary equipment, such as gloves, hats (helmets), face protection, sunscreen, hip protection, knee protection, etc.Details>>
ski skills introductory teaching
learn to fall first
sit down to the left or right rear. Pay attention to the fact that you must not sit directly behind, because you cannot sit on the ground directly behind your buttocks. Place your hands on both sides and don't be pressed by your buttocks. After your buttocks touch the ground, the steel edge of the snowboard will also scratch the snow, causing resistance and stopping the sliding of the snowboard.
then learn to fall down and get up
the hips are above and the snowboard is below. The snowboard is close to the slope at 90 degrees. Hold up the hips and body with your hands and squat on the snowboard to stand up. You can also put the snow stick behind you and support it with the snow stick.
how to turn
turn right and strengthen the pressure of the left snowboard on the snow surface, while turning left is the opposite. When turning, in addition to the pressure of the snowboard on the snow surface, the pressurized foot has an inward turning action. The knee does not press inward, just keep bending.
stand on a hillside and turn around
uses the eight-character brake technology to stand on the half slope, stabilize the tail of the board, quickly move the tip of the board, and rotate the body. When moving, the snow board is always in the shape of an eight-character, and the edge is used to block the snow surface.
how to turn around in a taxi
When you are a beginner, use the eight-character brake method to slow down to a certain speed. If you want to turn to the left, tilt your body's center of gravity to your right foot and keep the snowboard parallel to the snow surface. At this time, you can open your arms to feel the gravity and direction.Details>>
skis is good
1. Every holiday, it's time for online shoppers to show their skills. However, in the face of a variety of commodities and uneven prices, they don't know how to start?
2. Every holiday, it's time for online shoppers to show their skills. However, in the face of a variety of commodities and uneven prices, they don't know how to start?
Website alerts and statements
All works marked "MAIGOO Editing, Uploading and Providing" on this website are original works, legally copyrighted or entitled to use by MAIGOO. The above works may not be reproduced, excerpted or used in other ways without the authorization of this website. If the work has been authorized by this website, it should be used within the scope of authorization and indicate "Source: MAIGOO Network". Those who violate the above statement will be held accountable by the website.